ConfigTool Upgrade/Migrate: How to Add additional Stations

by Doug Rogier on June 15, 2010 · 0 comments

in Catalyst ConfigTool,ScanSource Catalyst

IP500 configuration from is visible after an Upgrade/Migrate it is possible to add additional stations to the configuration. This is benificail when the handsets need to be replaced or additional handsets need to be ordered for growth.  

To add additional stations without getting the error you will need to disable station error checking.  To do this go to the Phones tab then Digital & Analog Sets tab.  On the digital station tap there is a check box labeled All Additional Stations.  This will disable Station Error checking allowing you to add any number of stations.

This post was written by

Doug Rogier is a Convergence Specialist at Catalyst Telecom in Greenville, SC. He has over 20 years of experience in communications technologies and is a regular contributor to The Source on technical usage and scenarios.

Learn more about this topic at scansourcecatalyst.com >

Leave a Comment

Previous post:

Next post: