Reset

Zebra G Series Factory Defaults – Printer and Network Defaults

by ScanSource Technical Services January 17, 2013 Barcode Printing
ZebraGX420dmain

Factory Default The Factory Default will restore most printer settings to their factory default setting.  It will also have the printer perform a media calibration.  It solves a great many problems and is often a good way to start the troubleshooting process.

Janam XG100 Soft Reset, Hard Reset and Master Reset (Clean Boot)

by ScanSource Technical Services December 10, 2012 Mobility
JanamXG100 - Version 3main

To Soft Reset: In most situations, a soft reset restarts the device and saves all stored records and entries. However, any data that has not been saved will be lost during a soft reset. To perform a soft reset, do the following: Press trigger and ESC key at the same time and release. The Janam logo will appear followed by Microsoft […]

Sato CL612e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL612e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL608e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL608e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL412e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL412e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL408e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL408e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Zebra R110Xi4: How to Reset Printer to Factory Defaults

by ScanSource Technical Services July 26, 2011 Barcode Printing
Thumbnail image for Zebra R110Xi4:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]

Zebra 110XiIII Plus: How to Reset Printer to Factory Defaults

by ScanSource Technical Services June 26, 2011 Barcode Printing
Thumbnail image for Zebra 110XiIII Plus:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]

Zebra 170XiIII Plus: How to Reset Printer to Factory Defaults

by ScanSource Technical Services May 26, 2011 Barcode Printing
Thumbnail image for Zebra 170XiIII Plus:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]

Zebra 220XiIII Plus: How to Reset Printer to Factory Defaults

by ScanSource Technical Services May 26, 2011 Barcode Printing
Thumbnail image for Zebra 220XiIII Plus:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]