Maintenance

Sato CL408e: How to Set Up the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL408e:  How to Set Up the Enhanced Ethernet Interface

eSeries Enhanced Ethernet Setup Open Admin Manager and locate printer. Now Double click on the “prninst.exe” icon. Click next to begin the printer installation wizard. Select the printer you would like to install and click next. Enter the printer name and select Add Port. Click Add port then select SATO Port Monitor on LPT, LAN […]

Sato CL608e: How to Set Up the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL608e:  How to Set Up the Enhanced Ethernet Interface

eSeries Enhanced Ethernet Setup Open Admin Manager and locate printer. Now Double click on the “prninst.exe” icon. Click next to begin the printer installation wizard. Select the printer you would like to install and click next. Enter the printer name and select Add Port. Click Add port then select SATO Port Monitor on LPT, LAN […]

Sato CL612e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL612e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL608e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL608e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL412e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL412e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Sato CL612e: How to Set Up the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL612e:  How to Set Up the Enhanced Ethernet Interface

eSeries Enhanced Ethernet Setup Open Admin Manager and locate printer. Now Double click on the “prninst.exe” icon. Click next to begin the printer installation wizard. Select the printer you would like to install and click next. Enter the printer name and select Add Port. Click Add port then select SATO Port Monitor on LPT, LAN […]

Sato CL408e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL408e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Datamax-O’Neil Mark III: Internal Labels and Test Print

by ScanSource Technical Services August 1, 2011 Barcode Printing
Thumbnail image for Datamax-O’Neil Mark III:  Internal Labels and Test Print

The following section details the resident information and test labels. Database Configuration Label The Database Configuration Label provides information including the printer firmware version, memory allocations, enabled options, and label-counter data. Print a Database Configuration Label as follows: Load with media (4 inch wide) and ribbon (if printing with thermal transfer media). Turn the printer […]

Datamax-O’Neil Mark III: How Calibrate the Media

by ScanSource Technical Services August 1, 2011 Barcode Printing
Thumbnail image for Datamax-O’Neil Mark III:  How Calibrate the Media

The Quick Calibration can be performed using the DMXConfig Utility (see Section 3.5) or by holding down the multi-function button, (see section 3.3) . Once you have installed the DMXConfig utility and the printer is properly loaded with media, proceed with calibration as follows: Connect the host to the printer with a serial, parallel, or […]

Datamax-O’Neil Mark III: How to Install the Ribbon

by ScanSource Technical Services August 1, 2011 Barcode Printing
Thumbnail image for Datamax-O’Neil Mark III:  How to Install the Ribbon

The printer is capable of using C.S.I (Coated Side In) and C.S.O (Coated Side Out) ribbons in the following configurations:   ½” Core Ribbons Ribbon Core Width: 4.3 inches (110mm) Ribbon Width: 1.0 – 4.3 inches (25 – 110mm); Centered on core 1″ Core Ribbons (with Ribbon Core Adapters, see section 2.4.1.) Ribbon Core Width: […]