Intermec

Intermec CK61: Connecting and Configuring a Scanner

by ScanSource Technical Services March 29, 2011 AIDC
Thumbnail image for Intermec CK61:  Connecting and Configuring a Scanner

If the attached scanner is a 1551E or 1553E the terminal will try to configure the scanner. The first step is the terminal will attempt to make a baud rate match followed by Data Bits, Stop Bits, and Parity. If the attached scanner did not respond, the software will try several other settings each with […]

Intermec CV30: How to Connect a Motorola LS3578 Barcode Scanner

by ScanSource Technical Services January 18, 2011 AIDC
Thumbnail image for Intermec CV30: How to Connect a Motorola LS3578 Barcode Scanner

Program LS3578 to be in Bluetooth Keyboard Emulation Mode by scanning the barcode below. On the CV30, you will need to enter the Windows Mobile Bluetooth Manager, by clicking on: Start Settings Connections Bluetooth You will need to add the LS3578 manually, by clicking on: Devices Add New Device Once this begins looking for available […]

Intermec PD42: How to Select Emulations (Universal Firmware)

by ScanSource Technical Services January 11, 2011 Barcode Printing
Thumbnail image for Intermec PD42: How to Select Emulations (Universal Firmware)

The PD41 and PD42 printers come loaded with five different printer command languages. Follow the instructions below to configure your printer with the desired emulation. PD41 Selecting Emulation: When you power on your new PD41 – the unit will default to FINGERPRINT firmware – in order to change the firmware you will need to use […]

Technology Making A Difference in Haiti

by Tinsley Maness December 10, 2010 AIDC

If you’ve been watching the news lately, the situation in Haiti has been hard to miss – from the devastating earthquake to most recently, a growing and deadly cholera outbreak. As other countries continue to gather and mobilize aid relief for Haiti, it begs the question, how can technology help streamline those relief efforts? I recently […]

Intermec CN3: Electronic Serial Number (ESN) not valid according to CDMA carrier

by ScanSource Technical Services November 18, 2010 Mobility
Thumbnail image for Intermec CN3: Electronic Serial Number (ESN) not valid according to CDMA carrier

When supplying the ESN listed on the CN3 to my cellular provider they advised me that this was an invalid ESN. They are expecting an 11 digit numeric value and the ESN I have listed on the device is 8 alphanumeric characters. What could be the reason behind this? When Intermec prints the ESN on […]

Intermec SR61T: Can you connect an SR61T with the EX25 to a PDT using a serial adapter that provides 5 volts of power?

by ScanSource Technical Services November 18, 2010 Mobility
Thumbnail image for Intermec SR61T:  Can you connect an SR61T with the EX25 to a PDT using a serial adapter that provides 5 volts of power?

Can you connect an SR61T with the EX25 to a PDT using a serial adapter that provides 5 volts of power? No. The SR61T with the EX25 requires more power than can be provided by a handheld PDT. This restriction applies ONLY to the SR61T with EX25, all other configurations of the SR61T CAN be […]

Intermec CV30: Information on the Heater

by ScanSource Technical Services November 18, 2010 Barcode Printing
Thumbnail image for Intermec CV30:  Information on the Heater

The CV30 heater is controlled by a sensor so it does not need to be enabled or configured. The control trips at or near 32F. Here is additional information about the heater functionality The heater will only provide 4-8C increase in panel temperature. If you go from +10C to -23C (-10F) and stay long enough, […]

Intermec CK3: Default Password for the Intermec Browser

by ScanSource Technical Services November 18, 2010 Barcode Printing
Thumbnail image for Intermec CK3: Default Password for the Intermec Browser

The default password for Intermec Browser on the Intermec CK3 is 123456. Still have questions or technical trouble? If your already a ScanSource Reseller contact us for further support. Phone: 800-944-2439 ext. 4002 Email: support@scansoure.com Not yet a ScanSource Reseller? Click here to find out how easy it is to become one.

Intermec CK3: Intermec Browser Frequently Asked Questions

by ScanSource Technical Services November 4, 2010 Mobility
Thumbnail image for Intermec CK3:  Intermec Browser Frequently Asked Questions

1. Where can I download a demo of Intermec Browser? Click here 2. What is the default password? 123456 3. How can I make the Intermec Browser autostart? On the PDT go to Start/programs/file explorer/my device/Flash File Store/Intermec Browser Tap and hold Intermec Browser. Select COPY from pop-up menu Now go to My Device/Windows/StartUp. Tap […]

Intermec CN50: How to Determine the Operating System Version

by ScanSource Technical Services November 4, 2010 Mobility
Thumbnail image for Intermec CN50:  How to Determine the Operating System Version

To find what version of the Intermec OS your running on your Intermec CN50, click on: Start Settings System Tab About Packages Tab Platform Version Instructions also available here: Latest CN50 downloads. Still have questions or technical trouble? If your already a ScanSource Reseller contact us for further support. Phone: 800-944-2439 ext. 4002 Email: support@scansoure.com […]