Intermec

Evaluating Total Cost of Ownership for E-Citations

by Katharine Peery August 18, 2011 Government

Guest Contributor: Dan Bodnar, Director of Product Management, Intermec Total Cost of Ownership, or TCO, is often considered for e-citation applications in large part due to the mission-critical nature of law enforcement. Here are some key takeaways around TCO: First, a critical aspect of any successful TCO analysis needs to include the business elements of [...]

Read More

Main Benefits of Adopting E-Citation

by Katharine Peery July 28, 2011 Government

Guest Contributor: Dan Bodnar, Director of Product Management, Intermec Intermec has long been helping public sector organizations do more with less. With declining budgets and increasing demand for services, public sector organizations are under more pressure to tighten processes and spend tax dollars wisely. Police are among a growing list of public sector organizations that are [...]

Read More

Intermec CN3e: Does this Device have an IrDA Port?

by ScanSource Technical Services July 26, 2011 Mobility
Thumbnail image for Intermec CN3e:  Does this Device have an IrDA Port?

When you order the CN3e with the Area Imager scanner it has an IrDA port. The IrDA port is located on the back of the CN3e next to the stylus holder. NOTE: The CN3e with the camera option does not have an IrDA port. Earlier CN3′s that were sold with the Area Imager may or [...]

Read More

Intermec CV30: Connecting an SR61T Scanner

by ScanSource Technical Services July 26, 2011 Mobility
Thumbnail image for Intermec CV30:  Connecting an SR61T Scanner

You will need: SR61T Scanner (instructions assume it is a default configuration) RS232 Cable INT-236184001 CV30 with available COM1 or COM3 port Setup Instructions: Turn off the CV30 and attach the RS232 cable to COM1 or COM3 Attach the other end of the cable to the SR61T Power on the CV30 On the CV30 with [...]

Read More

Intermec CK3: How to Stop ITE (Intermec Terminal Emulator) From Running Automatically

by ScanSource Technical Services June 26, 2011 Mobility
Thumbnail image for Intermec CK3:  How to Stop ITE (Intermec Terminal Emulator) From Running Automatically

To prevent Intermec Terminal Emulator (ITE) from running automatically, follow these steps: On the CK3 tap Start/Settings/ System tab/Intermec Settings Expand Applications by tapping on the ‘+’ sign to the left Tap the ‘+’ next to ITE Tap the box entitled NO Auto-Start, you should now see a check in the box Tap File/Save Settings [...]

Read More

SS Technical Article: Prolonging the Lifespan of your Thermal Barcode Printer Printhead

by ScanSource Technical Services June 16, 2011 Barcode Printing
Thumbnail image for SS Technical Article:  Prolonging the Lifespan of your Thermal Barcode Printer Printhead

Variables for Printhead Life Span Since the printhead is considered to be a consumable, customers often want to know exactly how long they can expect a printhead to last. The lifespan of most printheads are measured in millions of linear inches printed. The more you print, the quicker the printhead will wear out. Print volume [...]

Read More

Making college campuses safer one RFID system at a time.

by Tinsley Maness May 13, 2011 RFID

If you watch the news, then you have most certainly heard of the security issues facing today’s college campuses.  In the wake of the shootings at the Virginia Tech campus, the leaders at Bob Jones University decided to implement an Intermec RFID system to make their campus more secure. As an added benefit to the security [...]

Read More

Intermec CK61: Connecting and Configuring a Scanner

by ScanSource Technical Services March 29, 2011 AIDC
Thumbnail image for Intermec CK61:  Connecting and Configuring a Scanner

If the attached scanner is a 1551E or 1553E the terminal will try to configure the scanner. The first step is the terminal will attempt to make a baud rate match followed by Data Bits, Stop Bits, and Parity. If the attached scanner did not respond, the software will try several other settings each with [...]

Read More

Intermec CV30: How to Connect a Motorola LS3578 Barcode Scanner

by ScanSource Technical Services January 18, 2011 AIDC
Thumbnail image for Intermec CV30: How to Connect a Motorola LS3578 Barcode Scanner

Program LS3578 to be in Bluetooth Keyboard Emulation Mode by scanning the barcode below. On the CV30, you will need to enter the Windows Mobile Bluetooth Manager, by clicking on: Start Settings Connections Bluetooth You will need to add the LS3578 manually, by clicking on: Devices Add New Device Once this begins looking for available [...]

Read More

Intermec PD42: How to Select Emulations (Universal Firmware)

by ScanSource Technical Services January 11, 2011 Barcode Printing
Thumbnail image for Intermec PD42: How to Select Emulations (Universal Firmware)

The PD41 and PD42 printers come loaded with five different printer command languages. Follow the instructions below to configure your printer with the desired emulation. PD41 Selecting Emulation: When you power on your new PD41 – the unit will default to FINGERPRINT firmware – in order to change the firmware you will need to use [...]

Read More