How To

Sato CL408e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services August 26, 2011 Barcode Printing
Thumbnail image for Sato CL408e:  How to Reset the Enhanced Ethernet Interface

Remove the Network Card from the Printer. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.) Put Network Card back […]

Datamax-O’Neil Mark III: Internal Labels and Test Print

by ScanSource Technical Services August 1, 2011 Barcode Printing
Thumbnail image for Datamax-O’Neil Mark III:  Internal Labels and Test Print

The following section details the resident information and test labels. Database Configuration Label The Database Configuration Label provides information including the printer firmware version, memory allocations, enabled options, and label-counter data. Print a Database Configuration Label as follows: Load with media (4 inch wide) and ribbon (if printing with thermal transfer media). Turn the printer […]

Datamax-O’Neil External Rewind: How to Set Up an External Rewind

by ScanSource Technical Services August 1, 2011 Barcode Printing
Thumbnail image for Datamax-O’Neil External Rewind:  How to Set Up an External Rewind

  Instructions also available for download. Still have questions or technical trouble? If your already a ScanSource Reseller contact us for further support. Phone: 800-944-2439 ext. 4002 Email: support@scansoure.com Not yet a ScanSource Reseller? Click here to find out how easy it is to become one.

Zebra R110Xi4: How to Reset Printer to Factory Defaults

by ScanSource Technical Services July 26, 2011 Barcode Printing
Thumbnail image for Zebra R110Xi4:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]

Zebra Setup Utility: How to Setup Wireless Printer Communication

by ScanSource Technical Services July 26, 2011 Barcode Printing
Thumbnail image for Zebra Setup Utility:  How to Setup Wireless Printer Communication

Load the Zebra Setup Utility that came on the CD with your printer or download it if needed. When you open Zebra Setup Utility, you will need to load the ZDesigner driver and interface for your corresponding printer. You will now need to highlight your printer and click on “Configure Printer Connectivity”. You will now […]

Zebra Setup Utility: How to Reset Printer to Factory Defaults

by ScanSource Technical Services June 29, 2011 Barcode Printing
Thumbnail image for Zebra Setup Utility:  How to Reset Printer to Factory Defaults

Download and install Zebra Setup Utility or install if from the CD that came with your printer. When you open Zebra Setup Utility, you will need to load the ZDesigner driver and interface for your corresponding printer. You will now need to highlight your printer and click on “Open Printer Tools”. You will now need […]

Intermec CK3: How to Stop ITE (Intermec Terminal Emulator) From Running Automatically

by ScanSource Technical Services June 26, 2011 Mobility
Thumbnail image for Intermec CK3:  How to Stop ITE (Intermec Terminal Emulator) From Running Automatically

To prevent Intermec Terminal Emulator (ITE) from running automatically, follow these steps: On the CK3 tap Start/Settings/ System tab/Intermec Settings Expand Applications by tapping on the ‘+’ sign to the left Tap the ‘+’ next to ITE Tap the box entitled NO Auto-Start, you should now see a check in the box Tap File/Save Settings […]

Zebra 110XiIII Plus: How to Reset Printer to Factory Defaults

by ScanSource Technical Services June 26, 2011 Barcode Printing
Thumbnail image for Zebra 110XiIII Plus:  How to Reset Printer to Factory Defaults

To reset defaults through the front panel, Press two times. The LCD will read SAVE CHANGES. Press until LOAD DEFAULTS is displayed. Press again. The printer will then display LOADING DEFAULTS. Once the printer has reset to default it will perform a self calibration. Still have questions or technical trouble? If your already a ScanSource […]

Zebra Setup Utility: How to Change Print Mode

by ScanSource Technical Services June 26, 2011 Barcode Printing
Thumbnail image for Zebra Setup Utility:  How to Change Print Mode

Install and open the Zebra Setup Utility. It can be found on the CD that ships with the printer or downloaded from the link above.   Open the utility and select the correct ZDesigner driver and interface for your corresponding printer. Once the driver is installed, highlight your printer and click on Configure Printer Settings. […]

Zebra S4M: How Can I See the Total Number of Inches the Printhead has Printed?

by ScanSource Technical Services June 26, 2011 POS
Thumbnail image for Zebra S4M:  How Can I See the Total Number of Inches the Printhead has Printed?

Once printer is in ready mode. Press the menu key. Press left arrow until you see “ADVANCED SETUP 3″. Press the enter button. It will now ask for the password. The password is “9999″. The horizontal arrows move the cursor to the left and right. The vertical arrows increment the choice the cursor is on. […]