Sato CL612e: How to Reset the Enhanced Ethernet Interface

by ScanSource Technical Services on August 26, 2011

in Barcode Printing,ScanSource POS & Barcode,Technical Knowledge Portal,Technology

Post image for Sato CL612e:  How to Reset the Enhanced Ethernet Interface
  1. Remove the Network Card from the Printer.

  1. Locate Dip Switches on the card and put DSW2 in the up position. (If your card does not have Dip Switches Put Network Card back in printer and press black reset button on the back once the printer is on and skip remaining steps.)

  1. Put Network Card back in the printer and power the printer on with DSW2 still on.
  2. Let printer initialize and go online then turn printer back off.
  3. Remove Network Card again and put DSW2 back down and re-install card.

  1. Now you can power the printer on and continue with configuration of the Network Card.

***Note: Default Admin. Username = root |Password: (leave blank) New Cards. Older Cards with reset button Default Admin. Password is access.

Instructions also available for download.

Still have questions or technical trouble?

If your already a ScanSource Reseller contact us for further support.

Not yet a ScanSource Reseller? Click here to find out how easy it is to become one.

This post was written by

Our experienced, trained technical support team is ready to go to work for you. Whether you need pre-sale support, installation help, or warranty and financing information, we can help. You can also access industry information from a wide variety of sources at our technical knowledge portal. Instead of sorting through the websites of 50 or more manufacturers to find out about products and programs, you can use our categorized search engine to locate information of any type about any technology offered by ScanSource. Just type in your query, and you're on your way. Contact our Technical Support Team at 800.944.2439 ext. 4002. Our staff is available from 8:30 a.m. until 8:00 p.m. EST.

Learn more about this topic at scansource.com >

Comments on this entry are closed.

Previous post:

Next post: