Janam XG100 Soft Reset, Hard Reset and Master Reset (Clean Boot)

by ScanSource Technical Services on December 10, 2012 · 0 comments

in Mobility,ScanSource POS & Barcode,Technical Knowledge Portal,Technology

JanamXG100 - Version 3main

To Soft Reset:

In most situations, a soft reset restarts the device and saves all stored records and entries. However, any data that has not been saved will be lost during a soft reset. To perform a soft reset, do the following:

  1. Press trigger and ESC key at the same time and release.
  2. The Janam logo will appear followed by Microsoft Windows screen.

 To Hard Reset:

hard reset restores the XG100, and removes ALL applications and data in volatile memory. Be sure that all data is backed up before performing a hard reset.

To perform a hard reset, do the following:

  1. Press and release CTRL key, BKSP key and the trigger.
  2. Wait for 5 seconds.
  3. Press Power key.

To Master Reset (or clean boot):

master reset or clean boot returns the XG100 to factory settings, removing ALL applications and data from the device. Be sure that all data is backed up before performing a clean boot.

To perform a master reset/clean boot, do the following:

  1. Press and release CTRL key, BKSP key and the trigger.
  2. Wait for 5 seconds.
  3. Press and hold CTRL key and FUNC (Orange) key.
  4. Press and release Power key.
  5. Release CTRL key and FUNC key after 10 seconds.
  6. Device reboots, Janam splash screen appears. After the reboot, the calibration screen appears.
  7. Complete the calibration using a stylus and the Today screen appears.
This post was written by

Our experienced, trained technical support team is ready to go to work for you. Whether you need pre-sale support, installation help, or warranty and financing information, we can help. You can also access industry information from a wide variety of sources at our technical knowledge portal. Instead of sorting through the websites of 50 or more manufacturers to find out about products and programs, you can use our categorized search engine to locate information of any type about any technology offered by ScanSource. Just type in your query, and you're on your way. Contact our Technical Support Team at 800.944.2439 ext. 4002. Our staff is available from 8:30 a.m. until 8:00 p.m. EST.

Learn more about this topic at scansource.com >

Leave a Comment

Previous post:

Next post: