Datamax M, I and H Class Printers: Adjusting Front Screen Contrast

by ScanSource Technical Services on December 28, 2012 · 0 comments

in Barcode Printing,ScanSource POS & Barcode,Technical Knowledge Portal,Technology


To adjust the screen contrast on the Datamax M, I or H class printer, press and hold the “Menu” button on the far left side.  As you hold down the Menu Button the display contrast will rotate from the lowest setting to the highest and back again. Just let go of the menu button when the contrast is adequate.


The new I Class Mark II does have a minor nuance.  When the Menu Button is pressed and held the Display Contrast Menu will come up.  Use the up and down arrows to change the contrast value then press Enter to save.datamax-printers-adjusting-screen-contrast-2


This post was written by

Our experienced, trained technical support team is ready to go to work for you. Whether you need pre-sale support, installation help, or warranty and financing information, we can help. You can also access industry information from a wide variety of sources at our technical knowledge portal. Instead of sorting through the websites of 50 or more manufacturers to find out about products and programs, you can use our categorized search engine to locate information of any type about any technology offered by ScanSource. Just type in your query, and you're on your way. Contact our Technical Support Team at 800.944.2439 ext. 4002. Our staff is available from 8:30 a.m. until 8:00 p.m. EST.

Learn more about this topic at >

Leave a Comment

Previous post:

Next post: